Acrosser AR-R5800 Manual do Utilizador

Revision: 1.0 Revision Description Date 1.0 Release 2011/03/04 AR-R5800 User Manual 1

Revision: 1.0 Item Description Quantity1 TOP COVER 1 2 POWER SUPPLY 1 3 POWER BRACKET 1 4 HDD BRACKET 1 5 BOTTOM BASE 1 6 1U EAR BRACKET 2

Revision: 1.0 2 Procedures of Assembly/Disassembly 2.1 2.5” HDD Installation The following instructions will guide you to install 2.5” HDD ste

Revision: 1.0 3. Take out HDD screws from packing bag. 4. Fix HDD with HDD bracket by 4 screws. 12

Revision: 1.0 5. Fix HDD with HDD bracket by 4 screws. 13

Revision: 1.0 6. Plug SATA power cable into motherboard. 7. The SATA power cable MUST go through below M/B power cable, please follow below

Revision: 1.0 8. Connect SATA cable and SATA power cable with HDD module. 9. Assemble top cover back by fastening the 2 screws. 15

Revision: 1.0 2.2 CF Card Installation 1. Open the top cover (the same as above steps). 2. Push CF card into CF socket. 3. Finish the CF c

Revision: 1.0 2.3 Power Cord Hook Installation 1. Take out the hook from packing bag. 2. Install the hook from right side firstly. 3. Then

Revision: 1.0 2.4 PCIe Card Installation 1. Unfasten two screws of PCIe bracket and then take out the PCIe card bracket. 2. Release the PC

Revision: 1.0 3. Fix the PCIe card with PCIe bracket. 4. Plug the PCIe module into PCIe slot following below direction. 19

Revision: 1.0 Copyright 2011 All Rights Reserved. Manual’s first edition: For the purpose of improving reliability, design and function, the

Revision: 1.0 5. Fasten the 2 screws in order to firm the PCIe module. 20

Revision: 1.0 2.5 Rack Bracket Installation 1. Take out the screws and Rack bracket from packing bag. 2. Fixed the Rack bracket to Chassi

Revision: 1.0 Intel® Core™2 LGA775 PROCESSOR Networking Board Book Number: AR-B5800-2011.01.10 AR-B5800 Board Board Guide

Revision: 1.0 1 Introduction AR-B5800 is designed for rack-mounted platform for networking appliance, e.g. VPN, SSL, UTM or firewall. With Intel

Revision: 1.0 1.1 Specifications  CPU: a LGA775 socket for Intel Core2 Processors in the 775-Land LGA package.  DMA channels: 7.  Interrup

Revision: 1.0 Memory: one Kingston KVR1333D3N9/2G. One 3.5” HDD OS: Windows XP SP3. Processor was running at 100% loading. Note: A proper power su

Revision: 1.0 1.3 Block Diagram 26

Revision: 1.0 2 H/W Information This chapter describes the installation of AR-B5800. At first, it shows the Function diagram and the layout of

Revision: 1.0 RTC1 System RTC battery socket Intel ICH7R PCIEXP1 PCI-Express X8 Slot DIMM1 240-Pin DDR3 Socket LGA775 CPU Socket DIMM2 240-Pi

Revision: 1.0 2.2 Connectors and Jumper Setting 2.2.1 Locations (Top side) 29

Revision: 1.0 Table of Contents System Installation Guide...5 1 Introduction to AR-R5800 ...

Revision: 1.0 LAN1 LAN1 RJ45 Connector FP_USB1 Internal USB2, USB3 connector. SYSFAN1 System FAN Connector. LAN2 LAN2 RJ45 Connector LCM1 Pin

Revision: 1.0 2.3 Connector and Jumper Setting 1. LAN1 ~ LAN8 RJ45 Connector 9. USB1 Connector LAN RJ45 Connector Connects to Local Area Netw

Revision: 1.0 15. LCM1 ( for LCM use ) 16. GP1 ( GPIO Header ) Pin SIGNAL 1 Pull-High to VCC5 2 VCC5 3 SOUTB 4 SINB 5 RTSB# 6 CTSB# 7 GND AL

Revision: 1.0 22. VGA1 (2x5pin 2mm Wafer). 23. ATX12V1. (ATX12V Power Input) VGA Wafer CONNECTOR . 24. SYSFAN3 (System FAN connector 3).

Revision: 1.0 28. JP1 (For LAN1/LAN2 Bypass Function Select.). 29. RTC1 Pins 1 and 2 shorted (Default): Forced Normal. Pins 2 and 3 shorted: Con

Revision: 1.0 3 BIOS setting This chapter describes the BIOS menu displays and explains how to perform common tasks needed to get the system up

Revision: 1.0 3.1 Main Setup Once you enter the Award BIOS™ CMOS Setup Utility, the Main Menu will appear on the screen. Use the arrow keys to hi

Revision: 1.0 SATA Channel 1/2 N/A The onboard SATA connectors provide 1 channel for connecting one SATA hard disks, the BIOS will auto-detect the

Revision: 1.0 Full Screen Logo Show Enabled Disabled Select Enabled to show the OEM full screen logo if you have add-in BIOS. APIC Mode Enabled Di

Revision: 1.0 Option Choice Description Reset Configuration Data Enabled Disabled Normally, you leave this field Disabled. Select Enabled to re

Revision: 1.0 3.8 BIOS Update... 44 4 Software Installation and

Revision: 1.0 Option Choice Description Onboard Serial Port 1 Onboard Serial Port 2 Serial Port 1: 3F8 / IRQ4 Serial Port 2: 2F8 / IRQ3 Select

Revision: 1.0 3.5 PC Health Setup This section shows the parameters in determining the PC Health Status. These parameters include temperatures, fa

Revision: 1.0 Option Choice Description First / Second / Third Boot Device/Other Boot Device Hard Disk CDROM USB-FDD USB-CDROM LAN Disabled The

Revision: 1.0 Option Choice Description Save & Exit Setup Pressing <Enter> on this item for confirmation: Save to CMOS and EXIT (Y/N)

Revision: 1.0 when you are prompted to enter the password. A message will confirm that the password will be disabled. Once the password is disable

Revision: 1.0 APPENDIX A. MEMORY MAP 45

Revision: 1.0 APPEXDIX B. IRQ MAP 46

Revision: 1.0 APPENDIX C. I/O PORT MAP 47

Revision: 1.0 48

Revision: 1.0 4 Software Installation and Programming Guide 4.1 Introduction LCD Control Module Overview The LCM (short for LCD Control Module) A

Revision: 1.0 AR-R5800 System System Installation Guide 5

Revision: 1.0 Pin Name on SIO I/O Direction Signal Name in Source CodeGP30 Configurable GPIO0 GP31 Configurable GPIO1 GP32 Configurable GPIO2 GP3

Revision: 1.0 4.2 File Descriptions LCD Control Module On Linux platform: 1. lcmdemo.c This file is the source code of the demo program. This pr

Revision: 1.0 GPIO and Watchdog On Linux platform: 1. sio_acce.c The source code of the Watchdog and GPIO APIs for accessing the SuperIO. 2. si

Revision: 1.0 On Windows platform: 1. LAN_Bypass.cpp LAN_Bypass demo program source code. 2. AR-B5800.h The header file of the APIs. 3. AR

Revision: 1.0 4.3 API List and Descriptions Type Definitions Typedef char i8; Typedef unsigned char u8; Typedef short i

Revision: 1.0 4. i32 displayLcm( bool mode ) Description: Show the text on the LCM screen or eliminate the text on the LCM screen. The content of

Revision: 1.0 GPIO and Watchdog GPIO 1. Syntax: i32 setChDir( u8 val ) Description: Set the direction (Input/Output) of GPIO ports according to

Revision: 1.0 Return Value: If the function gets the values successfully, it returns 0. If any error, it returns –1. 4. Syntax: i32 se

Revision: 1.0 58Parameters: The parameter ‘val’ is the value to set to watchdog timer register. The range is 0 ~ 255. Return Value: None. LAN By

Revision: 1.0 1 Introduction to AR-R5800 AR-R5800 series is a 1U height, rack-mounted platform for networking appliance, e.g. VPN, SSL, UTM or fi

Revision: 1.0 1.2 Packing List Description QuantityAR-R5800 system 1 Console Cable(RJ45) 1 Quick user manual 1 CD with Driver and Manual

Revision: 1.0 (2) Front Panel LCM Module Console USB*2 LEDs Lan*8 Keypad Reset (3) Back Panel PCIe x 8 slot Power Inlet

Revision: 1.0 (4) System Configuration 9